POR-15 RUST PREVENTIVE PAINT
Restoration Products Application Information
1. Never open the POR-15 can until you are ready to paint.
2. Make sure surface to be painted is bone-dry dry. Use a hairdryer if necessary.
3. You must use Metal-Ready first if you are painting POR15 on new steel,
galvanized metal , aluminum, or any smooth metal surface.
4. Do not apply POR-15 to a “tacky” surface.
Wait till the first coat is dry to the touch before applying a second coat of POR-15
5. Do not paint directly from the POR-15 can unless you are going to use up all
the paint in one session. Stir contents of can thoroughly, then dispense a quantity
of POR-15 into a separate container and seal can immediately using plastic
food wrap between lid and groove of can. If can is sealed metalto-metal with
paint in the groove, can will be sealed permanently. Best Method: keep groove
free of paint by using coffee scoop or similar device to dispense.
Note: Leftover paint should not be put back in can as this will shorten
shelf life and might cause pressure to build up in can, causing the lid to
pop off. Refrigerate unused POR-15 for longer shelf life.
6. If your job had to be degreased or cleaned, you must use Metal-Ready before
applying POR-15.
7. If you are perspiring and a bead of sweat drops into the POR-15 can, the paint
is ruined and should be thrown out. It won’t stick properly.
8. Use POR-15 in well ventilated areas only. We recommend the use an organic
vapor particulate respirator, NIOSH/MSHA approved, when applying POR-15. If
you are spray painting, you must use an air supplied respirator.
9. Never mix other paints with POR-15. Never try to add color to POR-15.
10. POR-15 should not be applied over other paints. It is UV sensitive and must
be topcoated with an opaque paint if left exposed to
the sun.
11. Never shake up a can of POR-15. It should always be stirred.
Information contained herein is to our knowledge true and accurate, but all recommen-dations or
suggestions are made without guarantee. Since the conditions of its use are beyond our control,
RestoMotive Laboratories/POR-15, Inc. disclaims any liability incurred in connection with the use of
its products and information contained herein. No person is authorized or empowered to make any
statement or recommendation not contained herein, and any such statement or recommendation
so made shall not bind the Corporation. Furthermore, nothing contained herein shall be construed
as a recommendation to use any product in confl ict with existing patents covering any material or
its use, and no license implied or in fact is granted herein under the claims of any patents.
Directions for people who don’t read directions
Restoration Products Application Information
1. Never open the POR-15 can until you are ready to paint.
2. Make sure surface to be painted is bone-dry dry. Use a hairdryer if necessary.
3. You must use Metal-Ready first if you are painting POR15 on new steel,
galvanized metal , aluminum, or any smooth metal surface.
4. Do not apply POR-15 to a “tacky” surface.
Wait till the first coat is dry to the touch before applying a second coat of POR-15
5. Do not paint directly from the POR-15 can unless you are going to use up all
the paint in one session. Stir contents of can thoroughly, then dispense a quantity
of POR-15 into a separate container and seal can immediately using plastic
food wrap between lid and groove of can. If can is sealed metalto-metal with
paint in the groove, can will be sealed permanently. Best Method: keep groove
free of paint by using coffee scoop or similar device to dispense.
Note: Leftover paint should not be put back in can as this will shorten
shelf life and might cause pressure to build up in can, causing the lid to
pop off. Refrigerate unused POR-15 for longer shelf life.
6. If your job had to be degreased or cleaned, you must use Metal-Ready before
applying POR-15.
7. If you are perspiring and a bead of sweat drops into the POR-15 can, the paint
is ruined and should be thrown out. It won’t stick properly.
8. Use POR-15 in well ventilated areas only. We recommend the use an organic
vapor particulate respirator, NIOSH/MSHA approved, when applying POR-15. If
you are spray painting, you must use an air supplied respirator.
9. Never mix other paints with POR-15. Never try to add color to POR-15.
10. POR-15 should not be applied over other paints. It is UV sensitive and must
be topcoated with an opaque paint if left exposed to
the sun.
11. Never shake up a can of POR-15. It should always be stirred.
Information contained herein is to our knowledge true and accurate, but all recommen-dations or
suggestions are made without guarantee. Since the conditions of its use are beyond our control,
RestoMotive Laboratories/POR-15, Inc. disclaims any liability incurred in connection with the use of
its products and information contained herein. No person is authorized or empowered to make any
statement or recommendation not contained herein, and any such statement or recommendation
so made shall not bind the Corporation. Furthermore, nothing contained herein shall be construed
as a recommendation to use any product in confl ict with existing patents covering any material or
its use, and no license implied or in fact is granted herein under the claims of any patents.
Directions for people who don’t read directions
POR-15 Paint Application
| POR-15 Paint |
 |  |  |  |
Custom Product Sales
